BATTERY IMPEDANCE METER BT4560
Kategori: Battery Testers
Fitur Utama • Pengukuran AC-IR frekuensi rendah *: Ukur resistansi reaksi baterai * BT4560 memastikan kualitas sel baterai dengan mengukur impedansi internal pada frekuensi rendah 1 Hz atau lebih rendah • Pengukuran yang sangat andal untuk baterai dengan impedansi rendah * BT4560 menggunakan arus pengujian 1,5 A pada kisaran 3mΩ, yang meningkatkan rasio S / N • Konfigurasi sirkuit sangat toleran terhadap kontak dan resistansi kawat untuk memberikan pengukuran yang stabil • Fungsi pengukuran tegangan setara dengan DMM 6 digit (± 0,0035% rdg.)
Hioki benchtop battery testers mendukung pengukuran kecepatan tinggi secara serentak di lini produksi yang terus berkembang semakin pesatnya baterai lithium-ion beresistansi rendah. Penguji impedansi baterai BT4560 mengukur impedansi baterai lithium-ion menggunakan metode pengukuran AC-IR frekuensi rendah tanpa mengisi dan mengeluarkan baterai, secara substansial mengurangi waktu yang diperlukan untuk memeriksa resistansi internal sel baterai.
| Allowable input voltage | Up to 5 V |
|---|---|
| Measured information | Impedance, voltage, temperature |
| Impedance measurement | Parameters: R, X, Z, θ, Frequency: 0.1 Hz to 1050 Hz, Measurement ranges: 3.0000 mΩ, 10.0000 mΩ, 100.000 mΩ Testing current: 3 mΩ range: 1.5 Arms, 10 mΩ range: 500 mArms, 100 mΩ range: 50 mArms |
| Voltage measurement | Measurement range: 5.00000 V (single range), Measurement time: 0.1 s (Fast) to 1.0 s (Slow) |
| Temperature measurement | Range: -10.0 °C to 60.0 °C, Measurement time: 2.3 s |
| Basic accuracy | Z: ±0.4% rdg. θ: ±0.1 °, V: ±0.0035% rdg. ±5 dgt. , Temperature: ±0.5 °C (at 10.0 to 40.0 °C) |
| Functions | Comparator, self-calibration, sample delay, average, contact check, measurement current error, and other |
| Interfaces | RS-232C/USB (virtual COM port) * Cannot be used simultaneously EXT. I/O (NPN/PNP can be switched) |
| Power supply | 100 to 240 V AC, 50/60 Hz, 80 VA max |
| Dimensions and mass | 330 mm (12.99 in) W × 80 mm (3.15 in) H × 293 mm (11.54 in) D, 3.7 kg (130.5 oz) |
| Accessories | Power cord ×1, Instruction manual ×1, Zero-adjustment board ×1, USB cable (A-B type) ×1, CD-R (communication instruction manual, PC application software, USB driver) ×1 |
Catatan: Produk ini tidak dilengkapi dengan probe pengukuran. Silakan pilih dan beli opsi probe pengukuran yang sesuai untuk aplikasi Anda secara terpisah.
Produk Terkait
NON-CONTACT CAN SENSOR SP7001, SP7002
Key Features Acquire CAN FD/CAN data immediately, simply by pinching probes over wire insulation with one-hand Eliminate concerns by using non-contact sensing technology Use in a diverse array of development and evaluation applications that demand reliability
DIFFERENTIAL PROBE P9000
• Probe kompak untuk lingkungan CAT III 1000V • Mode gelombang: Mengamati bentuk gelombang sesaat • Mode RMS: Amati bentuk gelombang nilai RMS • Area penggunaan utama 1. Sirkuit baterai tegangan tinggi pada EV, HEV, dan mobil lain 2. Sirkuit bertegangan tinggi pada peralatan terkait energi seperti sel fotovoltaik 3. Sirkuit saluran listrik komersial (480 Vrms, dll.) 4. Suara lonjakan tegangan tinggi dari inverter, motor, solenoida, dll.
AC FLEXIBLE CURRENT SENSOR CT9667
Key Features Thinner cables are easy to use in confined spaces and with complicated wiring (-01, -02) Shaped so that it’s easy to route through complex wiring Easily supports large current measurements up to 5000 A Wide 10 Hz to 20 kHz band with excellent frequency characteristics Choose from three conductor diameter sizes Combine with Hioki power meters or Memory HiCorders (with BNC input terminals)
AC/DC CURRENT SENSOR CT6877
Key Features Combined accuracy with HIOKI power analyzer PW8001, PW6001 and PW3390 is specified. For details of combined accuracy, refer to the instruction manual. Measures high-current up to 2000 A for EV, HEV and other electric vehicles Improved noise resistance performance through a stronger shield lets you accurately measure current buried in noise High accuracy measurement realized through flat frequency characteristics and CMRR performance More enhanced environmental resistance performance than ever before lets you measure in -40 to 85°C situations Superior frequency characteristics of DC to 1 MHz (amplitude) Meet a wide range of applications from measuring battery charge/discharge to the secondary side of inverters in photovoltaic power generation and fuel cell evaluation, etc. Monitor waveforms when paired with oscilloscopes or Memory HiCorders and Sensor Unit